ML07 Series Thermoelectric Coolers - powerful single-stage TECs for DWDM applications

		Performance @50ºC, Dry N2					Cold Side		Hot Side		Height	PDF
	TEC TYPE	dTmax	Qmax	Imax	Umax	ACR	A	B	C	D	H
		K	W	A	V	Ohm	mm	mm	mm	mm	mm
1ML07-017-xxAN25
	1ML07-017-03AN25	72	9.6	6.8	2.3	0.3	6.0	6.0	6.0	6.0	0.9
	1ML07-017-05AN25	75	6.0	4.2	2.3	0.4	6.0	6.0	6.0	6.0	1.1
	1ML07-017-07AN25	75	4.4	3.1	2.3	0.6	6.0	6.0	6.0	6.0	1.3
	1ML07-017-09AN25	76	3.5	2.4	2.3	0.7	6.0	6.0	6.0	6.0	1.5
	1ML07-017-10AN25	76	3.1	2.2	2.3	0.8	6.0	6.0	6.0	6.0	1.6
	1ML07-017-12AN25	76	2.6	1.8	2.3	1.0	6.0	6.0	6.0	6.0	1.8
	1ML07-017-15AN25	75	2.1	1.5	2.3	1.2	6.0	6.0	6.0	6.0	2.1
1ML07-017-xx/1AN25
	1ML07-017-05/1AN25	75	2.6	1.8	2.3	1.0	6.7	6.7	6.7	6.7	1.1
	1ML07-017-07/1AN25	75	2.1	1.5	2.3	1.2	6.7	6.7	6.7	6.7	1.3
	1ML07-017-09/1AN25	73	5.7	4.1	2.3	0.4	6.7	6.7	6.7	6.7	1.5
	1ML07-017-10/1AN25	75	3.1	2.2	2.3	0.8	6.7	6.7	6.7	6.7	1.6
	1ML07-017-12/1AN25	74	4.2	3.0	2.3	0.6	6.7	6.7	6.7	6.7	1.8
	1ML07-017-15/1AN25	75	3.4	2.4	2.3	0.7	6.7	6.7	6.7	6.7	2.1
1ML07-023-xxAN25
	1ML07-023-03AN25	72	13.0	6.8	3.2	0.4	6.0	8.2	6.0	8.2	0.9
	1ML07-023-05AN25	75	8.2	4.2	3.2	0.6	6.0	8.2	6.0	8.2	1.1
	1ML07-023-07AN25	75	6.0	3.1	3.2	0.8	6.0	8.2	6.0	8.2	1.3
	1ML07-023-09AN25	76	4.7	2.4	3.2	1.0	6.0	8.2	6.0	8.2	1.5
	1ML07-023-10AN25	76	4.2	2.2	3.2	1.1	6.0	8.2	6.0	8.2	1.6
	1ML07-023-12AN25	76	3.6	1.8	3.2	1.3	6.0	8.2	6.0	8.2	1.8
	1ML07-023-15AN25	75	2.9	1.5	3.2	1.7	6.0	8.2	6.0	8.2	2.1
1ML07-029-xxAN25
	1ML07-029-03AN25	70	15.4	6.5	3.9	0.5	6.0	10.2	6.0	10.2	0.9
	1ML07-029-05AN25	75	10.3	4.2	4.0	0.7	6.0	10.2	6.0	10.2	1.1
	1ML07-029-07AN25	76	7.5	3.1	4.0	1.0	6.0	10.2	6.0	10.2	1.3
	1ML07-029-09AN25	76	5.9	2.4	4.0	1.3	6.0	10.2	6.0	10.2	1.5
	1ML07-029-10AN25	76	5.3	2.2	4.0	1.4	6.0	10.2	6.0	10.2	1.6
	1ML07-029-12AN25	76	4.5	1.8	4.0	1.7	6.0	10.2	6.0	10.2	1.8
	1ML07-029-15AN25	76	3.6	1.5	4.0	2.1	6.0	10.2	6.0	10.2	2.1
1ML07-030-xxAN25
	1ML07-030-03AN25	73	16.9	6.8	4.1	0.5	6.0	10.2	6.0	12.2	0.9
	1ML07-030-05AN25	75	10.6	4.2	4.1	0.8	6.0	10.2	6.0	12.2	1.1
	1ML07-030-07AN25	76	7.8	3.1	4.1	1.0	6.0	10.2	6.0	12.2	1.3
	1ML07-030-09AN25	76	6.1	2.4	4.1	1.3	6.0	10.2	6.0	12.2	1.5
	1ML07-030-10AN25	76	5.5	2.2	4.1	1.5	6.0	10.2	6.0	12.2	1.6
	1ML07-030-12AN25	76	4.6	1.8	4.1	1.7	6.0	10.2	6.0	12.2	1.8
	1ML07-030-15AN25	76	3.7	1.5	4.1	2.2	6.0	10.2	6.0	12.2	2.1
1ML07-031-xxAN25
	1ML07-031-03AN25	72	17.5	6.8	4.2	0.5	8.0	8.0	8.0	8.0	0.9
	1ML07-031-05AN25	75	11.0	4.2	4.3	0.8	8.0	8.0	8.0	8.0	1.1
	1ML07-031-07AN25	76	8.0	3.1	4.3	1.1	8.0	8.0	8.0	8.0	1.3
	1ML07-031-09AN25	76	6.3	2.4	4.3	1.4	8.0	8.0	8.0	8.0	1.5
	1ML07-031-10AN25	76	5.7	2.2	4.3	1.5	8.0	8.0	8.0	8.0	1.6
	1ML07-031-12AN25	76	4.8	1.8	4.3	1.8	8.0	8.0	8.0	8.0	1.8
	1ML07-031-15AN25	76	3.9	1.5	4.3	2.2	8.0	8.0	8.0	8.0	2.1
1ML07-035-xxAN25
	1ML07-035-03AN25	73	19.7	6.8	4.8	0.5	6.0	12.2	6.0	12.2	0.9
	1ML07-035-05AN25	75	12.4	4.2	4.8	0.9	6.0	12.2	6.0	12.2	1.1
	1ML07-035-07AN25	76	9.0	3.1	4.8	1.2	6.0	12.2	6.0	12.2	1.3
	1ML07-035-09AN25	76	7.1	2.4	4.8	1.5	6.0	12.2	6.0	12.2	1.5
	1ML07-035-10AN25	76	6.4	2.2	4.8	1.7	6.0	12.2	6.0	12.2	1.6
	1ML07-035-12AN25	76	5.4	1.8	4.8	2.0	6.0	12.2	6.0	12.2	1.8
	1ML07-035-15AN25	76	4.3	1.5	4.8	2.5	6.0	12.2	6.0	12.2	2.1
1ML07-035-xx/1AN25
	1ML07-035-03/1AN25	72	19.8	6.8	4.8	0.5	7.0	14.0	7.0	14.0	0.9
	1ML07-035-05/1AN25	74	12.5	4.2	4.8	0.9	7.0	14.0	7.0	14.0	1.1
	1ML07-035-07/1AN25	75	9.1	3.1	4.8	1.2	7.0	14.0	7.0	14.0	1.3
	1ML07-035-09/1AN25	75	7.1	2.4	4.8	1.5	7.0	14.0	7.0	14.0	1.5
	1ML07-035-10/1AN25	75	6.5	2.2	4.8	1.7	7.0	14.0	7.0	14.0	1.6
	1ML07-035-12/1AN25	75	5.4	1.8	4.8	2.0	7.0	14.0	7.0	14.0	1.8
	1ML07-035-15/1AN25	75	4.4	1.5	4.8	2.5	7.0	14.0	7.0	14.0	2.1
1ML07-050-xxAN25
	1ML07-050-03AN25	73	28.2	6.8	6.8	0.8	7.0	15.0	7.0	15.0	0.9
	1ML07-050-05AN25	75	17.7	4.2	6.9	1.3	7.0	15.0	7.0	15.0	1.1
	1ML07-050-07AN25	76	12.9	3.1	6.9	1.7	7.0	15.0	7.0	15.0	1.3
	1ML07-050-09AN25	76	10.2	2.4	6.9	2.2	7.0	15.0	7.0	15.0	1.5
	1ML07-050-10AN25	76	9.2	2.2	6.9	2.4	7.0	15.0	7.0	15.0	1.6
	1ML07-050-12AN25	76	7.7	1.8	6.9	2.9	7.0	15.0	7.0	15.0	1.8
	1ML07-050-15AN25	76	6.2	1.5	6.9	3.6	7.0	15.0	7.0	15.0	2.1
1ML07-052-xxAN25
	1ML07-052-03AN25	73	29.3	6.8	7.1	0.8	7.0	15.0	7.0	17.0	0.9
	1ML07-052-05AN25	75	18.4	4.2	7.1	1.3	7.0	15.0	7.0	17.0	1.1
	1ML07-052-07AN25	76	13.4	3.1	7.1	1.8	7.0	15.0	7.0	17.0	1.3
	1ML07-052-09AN25	76	10.6	2.4	7.2	2.3	7.0	15.0	7.0	17.0	1.5
	1ML07-052-10AN25	76	9.6	2.2	7.2	2.5	7.0	15.0	7.0	17.0	1.6
	1ML07-052-12AN25	76	8.0	1.8	7.2	3.0	7.0	15.0	7.0	17.0	1.8
	1ML07-052-15AN25	76	6.5	1.5	7.2	3.7	7.0	15.0	7.0	17.0	2.1
1ML07-052-xx/1AN25
	1ML07-052-03/1AN25	72	29.4	6.8	7.1	0.8	7.5	17.0	7.5	18.0	0.9
	1ML07-052-05/1AN25	75	18.5	4.2	7.1	1.3	7.5	17.0	7.5	18.0	1.1
	1ML07-052-07/1AN25	75	13.5	3.1	7.2	1.8	7.5	17.0	7.5	18.0	1.3
	1ML07-052-09/1AN25	76	10.6	2.4	7.1	2.3	7.5	17.0	7.5	18.0	1.5
	1ML07-052-10/1AN25	76	9.6	2.2	7.2	2.5	7.5	17.0	7.5	18.0	1.6
	1ML07-052-12/1AN25	76	8.0	1.8	7.2	3.0	7.5	17.0	7.5	18.0	1.8
	1ML07-052-15/1AN25	75	6.5	1.5	7.2	3.7	7.5	17.0	7.5	18.0	2.1

STANDARD ML07 SERIES THERMOELECTRIC COOLERS ( thin AlN 0.25mm Ceramics)

1ML07 TE COOLERS ADVANTAGES

1ML07 TE COOLERS KEY FEATURES

◻︎ Powerful TECs, extra 35-40% Qmax reserve

◻ Dimensions from 6x6mm2 up to 7x15mm2

◻ Elongated TEC shape for DWDM packages

◻ Al2O3, AlN and mixed ceramics combinations

◻ High-quality bulk BiTe material

◻ Accurate steam soldering technology

◻ RoHS compliant TE Coolers by default

◻ Telcordia GR-468 qualified TECs

1ML07

TECs on AlN

ceramics 0.25mm

1ML07

TECs on AlN

ceramics 0.5mm

1ML07

TECs on Al2O3

ceramics 0.25mm

1ML07

TECs on Al2O3

ceramics 0.5mm

Thermoelectric coolers of ML07 Series are specially developed for applications with industry-standard DWDM packages like 14pin "Butterfly" or DIL. ML07 TECs are all the direct analogs of ML06 TEC Series by geometry but have an extra 35-40% cooling capacity reserve for applications with heavy heatload. In addition to the standard types on Al2O3 ceramics, 1ML07 thermoelectric coolers are available on AlN with better temperature uniformity among TEC surfaces (important for direct mounting to TEC cold side without intermediate ceramics bench). ML07 TECs are assembled using RoHS-compliant Sn-Sb solder with a melting temperature Tmelt=230ºC. All thermoelectric coolers of ML07 Series meet Telcordia GR-486 Standard requirements. A wide range of TEC manufacturing options is available. The standard and most common ML07 Series TECs on thin AlN (0.25mm) ceramics are listed in the table below. Detailed TEC drawings, 3D models, performance plots and estimations for particular application conditions are provided by request.

Expand Table >>