TEC Microsystems - Miniature Thermoelectric Coolers and Sub-Assemblies




Performance @27ºC, Vacuum 

Cold Side

Hot Side

Height

PDF

TEC TYPE

dTmax

Qmax

Imax

Umax

ACR

A

B

C

D

H



K

W

A

V

Ohm

mm

mm

mm

mm

mm

2MX10-029-0510 (Two ceramic versions )

2MX10-029-0510 Thermoelectric Cooler

2MX10-029-0510

82

5.3

5.7

2.3

0.3

15.0

15.0

15.0

15.0

3.2

2MX10-029-0510 Thermoelectric Cooler Datasheet

2MX10-029-0510AN

83

5.5

5.8

2.4

0.3

15.0

15.0

15.0

15.0

3.2

2MX10-029-0510AN Thermoelectric Cooler Datasheet

2MX10-029-0816 (Two ceramic version )

2MX10-029-0816 Thermoelectric Cooler

2MX10-029-0816

85

3.6

3.8

2.3

0.5

15.0

15.0

15.0

15.0

4.1

2MX10-029-0816 Thermoelectric Cooler Datasheet

2MX10-029-0816AN

85

3.6

3.8

2.4

0.5

15.0

15.0

15.0

15.0

4.1

2MX10-029-0816AN Thermoelectric Cooler Datasheet

2MX10-029-1020 (Two ceramic versions )

2MX10-029-1020 Thermoelectric Cooler

2MX10-029-1020

86

2.9

3.1

2.4

0.6

15.0

15.0

15.0

15.0

4.7

2MX10-029-1020 Thermoelectric Cooler Datasheet

2MX10-029-1020AN

86

2.9

3.1

2.4

0.6

15.0

15.0

15.0

15.0

4.7

2MX10-029-1020AN Thermoelectric Cooler Datasheet


STANDARD 2MX10 TYPE 2-STAGE THERMOELECTRIC COOLERS EXAMPLES

2MX TE COOLERS ADVANTAGES

2MX TE COOLERS KEY FEATURES

◻ High-quality bulk BiTe material

◻ Accurate steam soldering technology

◻ RoHS compliant TE Coolers by default

◻ Telcordia GR-468 qualified TECs

MX10 type 2-stage thermoelectric coolers - advanced balance of cooling performance and power consumption

2MX10

Two-stage

TE Coolers

2MX06

Two-stage

TE Coolers

2MX04

Two-stage

TE Coolers

1MX

Single-stage

TE Coolers

2-stage TECs of 2MX10 type have a revised commutation between BiTe pellet pairs inside on the second stage.  The mix of serial and parallel commutation allows to increase the numbe of pellets on top stage and enlarge TEC cold side.  The balanced stage coefficient (the ratio between number of pellets on top and bottom stages) is achieved by pellets height adjustment.  That's why 2-stage TECs of MX type pellets on 2nd stage higher than on 1st stage.  Such method allows to enlarge TEC cold side, increase the mechanical endurance of TEC second stage with more pellets installed and keep the optimal cooling performance without current or voltage increasing.  2MX TE coolers are optimal for X-Ray and IR detector applications.  All 2MX10 TECs are assembled using RoHS compliant Sn-Sb solder (Tmelt=230ºC) and meet Telcordia GR-486 standard requirements.  The examples of the most common MX type thermoelectric types are listed in the table below.  Detailed TEC drawings, 3D models, performance plots and estimations for particular application conditions are provided by request.

◻︎ Mixed serial/parallel pellets commutation

◻ Enlarged thermoelectric tooler cold side

◻ Wide range of standard TEC types available

◻ Wide range of manufacturing options available

Expand Table >>